Filter
Top Products
User Tools
40
4
Key Operator Tools
The key operator must set the follow-
ing items. For settings or more infor-
mation, contact the key operator.
It is recommended that the key oper-
ator program a key operator code
when performing the settings. See
p.40 “Key Operator Code”.
❖ User Code Man.: Copier
Allows you to control who uses the
machine by setting codes for users.
User codes must be registered for
user code management.
Note
❒ Default: Off
❖ Key Counter Management
Use the key counter to specify
whether users are restricted or not.
Note
❒ Default: Off
❒ [Key Counter Management] will
only be displayed when the key
counter is set.
❖ Key Operator Code
Specify whether or not to use pass-
words (max. eight digits) to con-
trol Key Operator Tools settings
for key operator code.
Note
❒ Default: Off
❒ If you select [On], enter the key
operator code (max. eight dig-
its) using the number keys, and
then select [On:Partial] or [On:All]
to set the access limit.
•If you selected [On:Partial]
A key operator code is only
required for the Timer Set-
tings and Key Operator
Tools for System Settings.
•If you selected [On:All]
A key operator code is re-
quired to access all items in
System Settings and Copier
Features.
❒ If you select [On:All], you must
enter a key operator code to ac-
cess the Key Operator Code dis-
play.
❖ Display/Print Counter
Allows you to view and print the
number of prints.
• Display/Print Counter
Displays the number of prints
for each function (Total, Copier
and A3/DLT).
•Print Counter List
Prints out a list of the number of
prints made under each func-
tion.
• To print the counter list
A Press the {User Tools/Counter}
key.
APE044S
ABC DEF
MNOJKL
WXYZTUV
ClearModes
User Tools/Counter
Clear/Stop
Start
KirC3a_oi_AE-F_FM.book Page 40 Friday, March 10, 2006 10:25 AM