Filter
Top Products
7
Job Separation You can enable Job Separation.
This menu can be selected only when a fin-
isher (optional) is installed.
Memory Usage You can select the amount of memory used
in Font Priority or Frame Priority, according
to paper size or resolution.
Duplex You can select to have print on both sides of
each page.
Copies You can specify the number of print sets.
This setting is disabled if the number of pag-
es to print has been specified with the printer
driver or another command.
Blank Page Print You can select whether or not to print blank
pages.
Edge Smoothing Set this to enable Edge Smoothing.
• On (Default)
•Off
If Toner Saving is set to On, Edge Smoothing
is ignored even if it is set to On.
Toner Saving Set this to enable Toner Saving.
• On (Default)
•Off
Printer Language You can specify the printer language.
Sub Paper Size You can enable the Auto Substitute Paper
Size (A4, LT) feature.
Page Size You can select the default paper size.
Letterhead Setting
You can rotate original images when printing.
When printing, original images are always
rotated by 180 degrees. Therefore, output
might not be as expected when printing onto
letterhead or preprinted paper requiring ori-
entation. Using this function, you can specify
image rotation.
Bypass Tray Priority You can specify which of the two options,
(Printer) Driver / Command or Machine Set-
tings, has priority for determining the paper
size for the bypass tray.
Edge to Edge Print You can select whether or not to print on the
entire sheet.
Default Printer Lang. You can set the default printer language if
the machine cannot find the printer language
automatically.
Tray Switching You can set to switch the paper tray.
RAM Disk You can change the settings of the RAM disk.
Menu Description