Filter
Top Products
Maintain the Everest printer
110875_A 21
Changing the print ribbon
Before you change the Everest print ribbon, allow time for the new ribbon to become acclimated
to the environment. Allow more time for greater temperature and humidity differences.
- Important! Ribbons must be stored at a temperature between 50°– 90°F (10°– 32°C). Avoid
moisture and direct sunlight. Do not reuse ribbons.
1. Power off the printer.
2. Remove the print ribbon.
a. Press the two side cover
latches to release the side
cover.
b. Lower the side cover.
c. Turn latch 1 counter-
clockwise.
d. Remove the print ribbon
carrier.
e. Remove the print ribbon
from the carrier.
Side cover latches
3. Discard the used print ribbon.
# Tip: Perform cleaning
procedures while the print
ribbon is removed. For more
information see
Cleaning the
Everest printer. Refer to
page
25.
Side cover
Print ribbon carrier
Latch 1