Filter
Top Products
Rimage Everest III printer
30 110875_A
n rning is
at could result in bodily injury to personnel operating or
p eline could result in loss or damage to the
oftware, or data.
cautions and familiarize yourself with their meaning
equipment.
n a
by the DVD-R recorder is a Class 2 laser and can be harmful to the
rm all
n be opened by hand. Do not insert your fingers.
ould be
orized repair.
Do not service the printer with the power cord plugged in the AC outlet.
Rimage™ Cautions and Warnings
Everest III Printer
Technical support and product updates
Technical Support and product updates for the Everest III printer is available at
Rimage.com/Support.
- Important: To register your Everest III printer, complete and return the registration card so
Rimage can notify you of upgrades as they become available.
Safety information
This information and the indications on the product allow proper and safe operation. The
indication marks below help protect you and other persons from injury, and equipment from
damage.
- Important! Any equipment that has certain components using AC line voltage, or in some
cases low DC voltages, such as power switches, power supplies, fuses, fans, non-stepper
motors, must be replaced with Rimage–approved components to maintain the safety
approval issued by UL.
Warning! According to ANSI (American National Standards Institute) standards, a wa
used to indicate situations th
maintaining the equipment.
Caution: Indicates that failure to observe this guid
equipment, product, s
Safety Precautions
To ensure safety, please read these pre
before using the
W rning!
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiant exposure.
The laser beam used
eyes. Do not attempt to open the recorder. An authorized technician should perfo
service procedures.
The front bezel of the printer ca
Do not touch the heater roller.
The interior of the printer contains sharp edges.
Do not disassemble or use tools on the printer. All service procedures sh
performed by a Rimage-authorized technician, or sent in for Rimage-auth