Filter
Top Products
Rimage Everest III printer
26 110875_A
Clean the tacky rollers with the Everest cleaning kit
1. Power off the printer.
2. Remove the print ribbon. For specific
instructions, see
Changing the print
ribbon. Refer to page 21.
3. To access the tacky rollers, remove
the supply roll from the print ribbon
carrier.
Note: The supply roll is the
unused portion of the print ribbon.
4. Clean the tacky rollers.
a. Apply isopropyl alcohol to the
sponge swab.
b. Use the sponge swab to clean
tacky roller 1.
c. Use the sponge swab to remove
any waxy buildup from other parts
of the ribbon carrier.
d. Reinstall the supply roll on the
print ribbon carrier.
e. Inside the printer, use the sponge
swab to wipe tacky roller 2.
5. Prepare the printer for use.
a. Install the print ribbon carrier.
b. Close all latches.
Ribbon
carrier
Tacky
roller 1
c. Close the side cover.
6. Power on the printer. The printer is
ready.
Ribbon carrie
r
Tacky
roller 2