Filter
Top Products
Rimage Everest III printer
28 110875_A
3. Clean the platen roller.
a. Apply isopropyl alcohol to the sponge
swab.
p Caution! Do not apply pressure when
cleaning the platen roller with the
sponge swabs. Applying pressure may
damage the platen roller, leaving
scratch marks on the printed disc.
b. As the platen roller rotates, use the
sponge swab to wipe the platen
roller, allowing it to rotate a full turn
before moving to the next area.
4. Press and release the operator button to exit diagnostics mode.
5. Power off the printer.
6. Prepare the printer for use.
a. Install the print ribbon carrier.
b. Install the retransfer ribbon carrier.
Retransfer
ribbon
carrier
Platen
rolle
r
c. Close all latches.
d. Close the side cover.
e. Turn the mode switch to the correct operating position. For more information, see
Everest printer switches. Refer to page 6.
7. Power on the printer. The printer is ready.