RobinAir AC1234-6 Tablet Accessory User Manual


  Open as PDF
of 50
 
16
Operating Instructions
Diagnostic Pressures
DiagnosticPressuresmodeisusedtocaptureand
printvehiclesystemoperatingpressures.Thefollowing
valuesareavailableforprinting:
•
vehicleinformation
•
systemhigh-sidepressure
•
systemlow-sidepressure
•
ambienttemperatureandhumidity
WhenDiagnosticPressuresmodeisselectedatthe
startofRECOVERYorAUTOMATICrecovery,the
valuesareavailableforprintinguntiltheendofthe
recovery.
Thecaptureofdiagnosticpressuresisrecommendedat
theendofCHARGEorAUTOMATICcharge.
WhenDiagnosticPressuresmodeisselected
fromMENU,valuesmaybeprintedaftercapturing
pressures.Themachinealsorequireshose
equalizationandhoseclear,necessarytoreduce
chargelossduetothediagnosticprocedure.
Printouts
At the End of Every Function
Dataforthefunctionjustcompletedmaybeprinted
fromtheresultsscreenbypressingOKonthe
machine’scontrolpanel.SeeFigure6.
After the Last Complete Service Mode
Asummaryofthecompleteservicemaybeprinted
fromSTORED DATAiftheVINwasenteredintothe
machinewhenprompted:
1.PressMENU onthemachine’scontrolpanel.
2.SelectFUNCTIONS.
3. ThechoicesunderSTORED DATA are:
•
PRINT DATA RECORD — alistofVINsisdisplayed.
UsetheUPorDOWNarrowtohighlighttheVINfor
whichyouwishtoprintservicedata.
•
DELETE DATA RECORD — followingtheprompts
forthisoptionpermanentlydeletesaVINandany
recordsassociatedwithit.
•
CLEAR ALL DATA — followingthepromptsforthis
optionpermanentlydeletesallVINsandanyrecords
associatedwiththem.
Press OK to print data for
the function just completed.
Figure 6
Note:
•
Diagnostic pressures will be available
in Stored Data only when captured with
a VIN entry in Recovery, Automatic, or
Charge modes.
•
Diagnostic pressures captured from
MENU can be printed immediately after
the diagnostic pressures are taken, but
they will not be stored.
•
When running Diagnostic Pressures from
MENU, refrigerant identication occurs
before clearing hoses.
 previous next