Filter
Top Products
105
Playing Arpeggios (ARPEGGIO/RHYTHM Function)
Playing Arpeggios (ARPEGGIO/RHYTHM Function)
When Using a Hold Pedal
If you play an arpeggio while pressing the hold pedal, the arpeggio
will continue to be played even if you release the chord.
1.
Connect an optional pedal switch (DP series etc.) to the
HOLD PEDAL jack.
2.
Press ARPEGGIO/RHYTHM [ON/OFF] to turn on the
arpeggio.
3.
Play a chord while pressing the hold pedal.
4.
If you play a different chord or notes while the arpeggio is
being held, the arpeggio will change accordingly.
Turning Arpeggio Switch On and Off
If you don’t want to play arpeggios, turn off the arpeggio switch.
If the arpeggio switch is turned off, no arpeggios will be played
even if ARPEGGIO/RHYTHM [ON/OFF] is lit.
1.
Press [SELECT/EDIT].
2.
Press [2 (Arp Sw)] to remove a check mark (
✔
).
The setting is toggled on/off each time you press [2 (Arp Sw)].
3.
When you have made the setting, press [EXIT].
Arpeggio Settings
1.
Press ARPEGGIO/RHYTHM [SELECT/EDIT].
2.
Press [3 (Arp)].
A screen like the one below appears.
If Performance mode is selected, (Performance) will appear at
the right of “Arpeggiator.”
fig.Arp01_50
3.
Press [CURSOR] to move the cursor to each parameter, and
either turn the VALUE dial or press [INC] or [DEC] to make
the setting.
4.
When you have made the setting, press [EXIT].
Selecting Styles for Arpeggio
Performances (Arpeggio Style)
This selects the arpeggio’s basic performance Style. The arpeggio
styles are kept in preset memory and user memory.
Value
: U001–128 (User), P001–128 (Preset)
For details on the settings, refer to
“Arpeggio Settings”
(p. 105)
For more on the prepared Arpeggio Styles already programmed
in the Fantom-S, refer to Sound List.
About Arpeggio Styles
An Arpeggio Style is a series of data for basic arpeggio patterns
and chord styles recorded in the form of a grid consisting of a
maximum of 32 steps x 16 pitches.
fig.GRID
Each grid contains one of the following kinds of data.
• ON: Note On (with Velocity data)
• TIE: Tie (hold of the previous note)
• REST: Rest (no sound played)
The keys that are pressed along with the sequence in which they
are pressed is referenced to the “lowest-pitched key during
input.” Thus, you can use a single Arpeggio Style in different
Patches and Performances at the same time.
A Arpeggio Style is not part of any patch or Performance, but
rather independent data; you can store up to 64 Arpeggio Styles.
STEP
HIGH
1
23
4 5
....
32
6
7
8
Note 01
Note 03
Note 02
Note 04
Note 16
9
10
11
Note 05
Note 06
Reference_e.book 105 ページ ２００３年７月１４日 月曜日 午後３時２５分