Filter
Top Products
133
Editing a Sample
Editing a Sample
Auditioning the Divided Samples
After dividing the sample, you can press the velocity pads to
audition each of the divided samples.
From the sample nearest to the start point, the samples will be
played by pads [1], [2],...[16]
Moving a Dividing Point
1.
Press or to move the cursor to “Point No.”
2.
Turn VALUE dial to select the point that you want to move.
In order from the start point, the points are numbered 1, 2,...15.
3.
Press .
4.
Turn VALUE dial to move the dividing point.
Deleting a Dividing Point
1.
Press or to move the cursor to “Point No.”
2.
Turn VALUE dial to select the point that you want to delete.
3.
Press [5 (Clear Point)].
The dividing point will be deleted.
Joining Two or More Samples
(Combine)
This operation combines multiple samples into a single sample. You
can combine as many as sixteen samples. You can also place silent
spaces between the samples.
1.
Press [SAMPLE EDIT] to access the Sample Edit screen.
2.
Press [3 (Sample Modify)] to access the Sample Modify
window.
3.
Press [7 (Combine)].
fig.Combine_50
4.
Either turn the VALUE dial or use [INC], [DEC] to set the
value.
•
1–16:
The sample or silence to be combined
•
TYPE
Value
Sample:
sample,
Time:
silent region (specified as time),
Beat:
silent region (specified as a note value)
•
BANK
(Bank that contains the sample)
Value
U:
user,
C:
card
* This will be displayed only if TYPE is set to Sample.
•
PRM
(Sample number, or the duration/note value of the silent
region)
Value:
1–10000 ms (if TYPE is set to Time), note value:
1/32, 1/
16T, 1/16, 1/8T, 1/8, 1/4T, 1/4, 1/2, 1/1, 2/1 (if TYPE is set to
Beat)
The note value is based on the BPM of the sample immediately
before the silent region.
* If there is no sample immediately before the silent region, the current
BPM will be used.
5.
Use [CURSOR] to select a parameter and repeat step 4.
You can press [6 (Preview)] to audition the selected sample.
6.
Press [6 (Exec)].
A message will ask you for confirmation.
7.
To execute, press [8 (Exec)].
* To cancel, press [7 (Cancel)].