Filter
Top Products
174
Playing a Phrase at the Touch of a Finger (RPS Function)
Recording a Performance Using the
RPS Function
A performance that uses the RPS function can be recorded in real
time in the same way as a conventional performance. This provides
an easy way to remix patterns and create a song.
If you use the RPS function during realtime recording, the
pattern performance will be recorded just as it occurs.
1.
Make sure that preparations for the RPS function have been
made correctly.
2.
Access the PLAY screen for the mode in which you want to
perform.
3.
Press [RPS] to turn on the RPS function (p. 173).
4.
Press [REC].
The [REC] indicator will blink, and the Realtime Rec Standby
window appears. In this window you can make various settings
for realtime recording.
fig.07-11_50
5.
Specify how recording is to take place.
For details on these settings, refer to
“Recording Your
Performance as You Play It (Realtime Recording)”
(p. 142).
6.
Press [PLAY].
The Recording Standby window will close, the [REC] indicator
will change from blinking to lit, and recording will begin.
7.
Press a key or pad to which a pattern is assigned.
The assigned patterns will be played back according to the keys
or pads you press, and their performances will be recorded.
If the Count In parameter is set to “WAIT NOTE” in the
Recording Standby window, recording will not begin even if you
press a key that is assigned to a pattern, or a key that is assigned
as a Stop Trigger key.
8.
When you are finished recording, press [STOP].
The [REC] indicator will go dark.
Reference_e.book 174 ページ ２００３年７月１４日 月曜日 午後３時２５分