Filter
Top Products
Chapter 4 More Advanced Operations
57
4-6 Items You Can Set Using the Driver
A Wide Variety Settings You Can Make with the Driver
At the setting window for the driver, you can make the settings for a wide variety of items, including the size of the
material and the method used for printing.
Displaying the Setting Window
Any changes you make at this window (the window displayed by using the procedure described here) remain in effect
even after you restart Dr. METAZA2. To continue operations with the changes applied, follow the procedure below to
display the setting window.
Procedure
➊
Windows XP
Click [Start], then click [Control Panel].
Click [Printers and Other Hardware], then click [Printers and Faxes].
Windows 98 SE/Me/2000
Click [Start].
Click [Settings], then click [Printers].
➋
Right-click [Roland MPX-70].
If you're using Windows XP/2000, click [Printing Preferences].
If you're using Windows 98SE/Me, click [Properties].
The setting window appears.
About the Setting Window
Going to the Dr. METAZA2 [File] menu and clicking [Print Setup], then, in the [Print Setup] window, clicking
[Properties], displays the same window as the one that appears using "Displaying the Setting Window," described
above.
Any changes you make while at this window disappear when you restart Dr. METAZA2. When you want to make
temporary changes in driver settings, display the setting window from Dr. METAZA2.