Rosewill EASYN400 Network Router User Manual


 
Wireless RouterRNX-EasyN400 User Manual
108
that might be interfering with the wireless network (for example, microwaves, other
wireless networks, and so on).
Reboot the RNX-EasyN400.
Please update the Wireless Adapter’s Firmware of your Notebook and PC to the latest
version to ensure the best connection.
You may consider to activate Qos function, please see section 3.8.7 Quality of
Service (QoS) on Page 69.
If problem remainds, please contact the network administrator or Rosewill.
Q: I cannot access the RNX-EasyN400 or ping any computer from the WLAN (wireless
AP or router).
A: Make sure the wireless LAN is enabled on the RNX-EasyN400
Make sure the wireless adapter on the wireless station is working properly.
Make sure your Notebook’s wireless adapter has the most current firmware.
Make sure the wireless adapter installed on your computer is IEEE 802.11
compatible and supports the same wireless standard as the RNX-EasyN400.
Make sure your computer (with a wireless adapter installed) is within the
transmission range of the RNX-EasyN400.
Check that both the RNX-EasyN400 and your wireless station are using the same
wireless and wireless security settings.
Make sure traffic between the WLAN and the LAN is not blocked by the firewall on
the RNX-EasyN400.
Make sure you allow the RNX-EasyN400 to be remotely accessed through the
WLAN interface. Check your remote management settings.