Filter
Top Products
Wireless RouterRNX-EasyN400 User Manual
28
3.2.1 Navigating RNX-EasyN400 in AP Router Mode
Click on the side menu selection on System, The picture screen below shows the
status screen in AP Router Mode.
3.2.1.1 RNX-EasyN400 Side Menu Description Table – AP Router Mode
LABEL DESCRIPTION
Status
This shows the RNX-EasyN400’s general device, system and interface status
information.
LAN
This is where you can configure LAN IP address, subnet mask, also to enable DHCP
server and IP range.
DHCP
Use this screen to view current DHCP client information and to always assign an IP
address to a MAC address (and host name).
Schedule This is where you can set to schedule your wireless internet service
Log This is where RNX-EasyN400 stores the event log file based on the process.
Monitor
You will see graphical diagrams showing the Bandwidth for WAN and WLAN.
System
(For detail,
please see
Page 34.)
Language You can select to have other language.
Wizard
(For detail, please see Page
42.)
You will be guide to setup your router based on a step by step process to either AP
router mode or AP Repeater mode.