Wireless RouterRNX-EasyN400 User Manual
27
3.1 Resetting the RNX-EasyN400
If you forget your password or IP address, or you cannot access the RNX-EasyN400
through Web Browser, you will need to use the <RESET> button at the back of the
RNX-EasyN400 to reload the factory-default configuration file. This means that you will
lose all configurations that you had previously saved, the Username and password will be
reset to “admin” and the IP address will be reset to “192.168.0.1”.
3.1.1 Procedure to Use the Reset Button
1. Make sure the power LED is on.
2. Press the RESET button for longer than 1 second to restart/reboot the RNX-
EasyN400.
3. Press the RESET button for longer than 10 seconds until you see the power LED is
blinking to set the RNX-EasyN400 back to its factory-default configurations.
3.2 Navigate RNX-EasyN400
The following will summarize on how to navigate RNX-EasyN400 in both AP
Router Mode and Repeater Mode.