Rosewill EASYN400 Network Router User Manual


 
Wireless RouterRNX-EasyN400 User Manual
4
Before We Begin
• Please configure RNX-EasyN400 with the computer that was last connected directly to
your modem.
• You can only use the Ethernet port on your modem. If you were using the USB
connection before using RNX-EasyN400, then you must turn off your modem,
disconnect the USB cable and connect an Ethernet cable to the Internet port on RNX-
EasyN400, and then turn the modem back on. In some cases, you may need to call your
ISP to change connection types (USB to Ethernet).
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any
PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or
you will not be able to connect to the Internet.
• When running the Setup Wizard from the Rosewill CD, make sure the computer you are
running the CD from is connected to the Internet and online or the wizard will not work.
If you have disconnected any hardware, re-connect your computer back to the modem
and make sure you are online.