Filter
Top Products
Wireless RouterRNX-EasyN400 User Manual
94
Mode: This is predefined as Repeater.
Band: Depending on the wireless router you want to connect to, you will need to adjust
the band accordingly to the wireless router.
Enable SSID #: By default, RNX-EasyN400 has 1 set of SSID in Repeater mode.
However, you can add two more SSIDs for your designate groups to link to.
SSID 1: This is the default SSID #. It will automatically adjust when you select your
desired signal to broadcast.
SSID 2: When you add the second SSID. You will see this option where you can enter
your desired SSID 2 name.
SSID 3: When you add the third SSID. You will see this option where you can enter your
desired SSID 3 name.
Site Survey: Once click this option, you will see a popup page which scan through your
local wireless signal. Below is the popup sample page which you will see.
Once you selected the SSID which you want to connect to, you will be ask
for the password depending on your setting in the wireless router you want
to connect to.