Filter
Top Products
Wireless RouterRNX-EasyN400 User Manual
18
LABEL DESCRIPTION
Host Name This is optional. Depending on if your ISP require you to provide this
information. Please leave this blank, if you are not sure.
MAC address The default value when Click <Clone MAC Address> is set to the WAN’s
physical interface of the broadband router.
Smart Wizard has finished setting up WAN Configuration. Click <Next> to proceed.
2.3.1.2 Wireless Security Selection
After Click <Next>, you should see the page as show below. By moving your mouse
curser on the <Security Bar>; you will see different Options for you to set up your
Wireless Router’s Connecting Mode.