Filter
Top Products
Wireless RouterRNX-EasyN400 User Manual
21
NOTE:
After Wireless settings are applied, you need to connect from your WLAN client with the
security settings you just finished configuring. Remember to write down the type of
security & security key you selected.
2.3.2 AP Repeater Mode
AP Repeater mode is the Repeater mode which will extend your wireless signal, but
does not enable WAN interface. Setup Wizard will skip WAN Configuration when you
select this mode. Click <Next> when select AP Repeater Mode.
NOTE:
For Detail step by step guides, please refer to page 89 for AP Repeater Mode.
The Wizard will prompt you to enter the SSID which you want to use for this Repeater
based on your security level. After type-in your desire SSID, click <Next>