Filter
Top Products
Wireless RouterRNX-EasyN400 User Manual
26
3 Accessing RNX-EasyN400 through Web
Browser in Router Mode
1. Make sure your RNX-EasyN400 hardware is properly connected and prepare your
computer or computer network to connect to the RNX-EasyN400 (refer to the
Quick Start Guide).
2. Launch your web browser.
3. Type "http://192.168.0.1" as the website address. Your computer must be in the
same subnet in order to access this website address.
4. Type "admin" (default) for both user name and password, then Click <OK>.
5. You should now see your RNX-EasyN400 System Status page as shown below in
AP Router Mode.