Filter
Top Products
Wireless RouterRNX-EasyN400 User Manual
34
3.3.2 LAN
The LAN Tabs reveals LAN settings which can be altered at will. If you are an entry
level user, try accessing a website from your browser. If you can access website without a
glitch, just do not change any of these settings.
Click <Apply> at the bottom of this screen to save the changed configurations.
LAN IP
IP address: 192.168.0.1. It is RNX-EasyN400’s LAN IP address (the “Default Gateway”
IP address of your LAN clients). It can be changed based on your own
choice.
IP Subnet Mask: 255.255.255.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree function is
enabled, this router will use the spanning tree protocol to
prevent network loops.