RTS DKP 16 CLD Network Card User Manual


 
124
8. Using the 3() or 6(), scroll to Save and Restart.
9. Press the SEL button.
Restarting.... appears. The keypanel resets. Once the restart is complete, the Poll ID is enabled.
Service Menu, Snoop Tally
Snoop Tally, when enabled, provides an indication to keypanel users somebody is listening to them. For example, snoop
tallies are displayed on keypanel 1, if there is another keypanel (2) which is listening to keypanel 1 via a point-to-point or a
special list, but is not talking to keypanel 1. Snoop tallies are suppressed if keypanel 1 has any talk keys turned on, or if the hot
mic is not enabled. Snoop tallies are supported on KP-32 family keypanels.
NOTE: Hot Mic must be activated on the keypanel for snoop tally to work. To enable Hot Mic, see “Audio Options
Menu, Matrix Out” on page 69.
By default, snoop tally is disabled (no chime).
To enable snoop tallies on the keypanel, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3() or 6(), select Service.
3. Press the SEL button.
The Service submenu appears in the display window.
4. Using the 3() or 6(), select Snoop Tally.
5. Press the SEL button.
Chime and No Chime (default) appear in the display window.
FIGURE 130. Set Address Save and Restart
FIGURE 131. Set Address Restarting