Filter
Top Products
9.6 <
Faxing (CLX-3160FN only)>
Other ways to fax
Sending a fax to multiple destinations
You can use the Multiple Send feature, which allows you to send a fax to
multiple locations. Originals are automatically stored in memory and sent
to a remote station. After transmission, the originals are automatically
erased from memory. You can not send a color fax using this feature.
1 Press Fax.
2 Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3 Adjust the document resolution and darkness to suit your fax
needs. See page 9.1.
4 Press Menu until Fax Feature appears on the bottom line of the
display and press
OK
.
5 Press the Scroll buttons until Multi Send appears and press
OK
.
6 Enter the number of the first receiving fax machine and press
OK
.
You can use speed buttons, speed dial numbers. You can enter
Group Dial Number using
Address Book
Button. For details, see
page 10.3.
7 Enter the second fax number and press OK.
The display asks you to enter another fax number to send the
document.
8 To enter more fax numbers, press OK when Yes appears and
repeat steps 6 and 7. You can add up to 10 destinations.
9 When you have finished entering fax numbers, press the Scroll
buttons to select No at the Another No.? prompt and press OK.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
10 If an original is placed on the scanner glass, select Yes to add
another pages. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine begins sending the fax to the numbers you entered in
the order in which you entered them.
Note
• Once you entered a group dial number, you cannot enter
another group dial numbers anymore.
Sending a delayed fax
You can set your machine to send a fax at a later time when you will not
be present. You can not send a color fax using this feature.
1 Press
Fax
.
2 Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3 Adjust the document resolution and darkness to suit your fax
needs. See page 9.1.
4 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
5 Press the Scroll buttons until Delay Send appears and press
OK
.
6 Enter the number of the receiving machine using the number
keypad.
You can use speed buttons, speed dial numbers. You can enter
Group Dial Number using
Address Book
Button.For details, see
page 10.3.
7 Press OK to confirm the number. The display asks you to enter
another fax number to which to send the document.
8 To enter more fax numbers, press OK when Yes appears and
repeat steps 6 and 7. You can add up to 10 destinations.
9 When you have finished entering fax numbers, press
the
Scroll
buttons to select No at the Another No.? prompt and press OK.
10 Enter the job name you want and press OK.
For details on how to enter alphanumeric characters, see page 2.3.
If you do not want to assign a name, skip this step.
11 Enter the time using the number keypad and press OK, or Black
Start.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
12 If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine returns to Standby mode. The display reminds you
that you are in Standby mode and that a delayed fax is set.
Note
• Once you entered a group dial number, you cannot enter
another group dial numbers anymore.
Note
• If you set a time earlier than the current time, the fax will
be sent at that time on the following day.