Filter
Top Products
10.4 <
Fax setup (CLX-3160FN only)>
You can also search through memory for an entry by pressing Address
Book. See page 10.4.
Group dial numbers
If you frequently send the same document to several destinations, you
can group these destinations and set them under a group dial number.
You can then use a group dial number to send a document to all of the
destinations within the group. You can set up to 200 (0 through 199)
group dial numbers using the destination’s existing speed dial numbers.
Registering a group dial number
1 Press Fax.
2 Press Address Book until New & Edit appears on the bottom line
of the display and press OK.
3 Press the Scroll buttons until Group Dial appears and press OK.
4 Enter a group dial number between 0 and 199 and press OK.
5 Enter a speed dial number and press OK.
6 Press OK when speed dial information appears correctly.
7 Press OK when Yes appears.
8 Repeat steps 5 and 6 to include other speed dial numbers into the
group.
9 When you have finished, press the Scroll buttons to select No at
the Another No.? prompt and press OK.
10 Press Stop/Clear to return to Standby mode.
Editing a group dial number
You can delete a specific entry from a group or add a new number to the
selected group.
1 Press Address Book until New & Edit appears on the bottom line
of the display and press OK.
2 Press the Scroll buttons until Group Dial appears and press OK.
3 Enter the group dial number you want to edit and press OK.
4 Enter the speed dial number you want to add or delete and press
OK.
If you entered a new speed dial number, Add? appears.
If you enter a speed dial number stored in the group, Delete?
appears.
5 Press OK to add or delete the number.
6 Press OK when Yes appears to add or delete more numbers and
repeat steps 4 and 5.
7 When you have finished, press the Scroll buttons to select No at
the Another No.? prompt and press OK.
8 Press Stop/Clear to return to Standby mode.
Using group dial numbers
To use a group dial entry, you need to search for and select it from
memory.
When you are prompted to enter a fax number while sending a fax, press
Address Book. See below.
Searching Address Book for an entry
There are two ways to search for a number in memory. You can either
scan from A to Z sequentially, or you can search by entering the first
letters of the name associated with the number.
Searching sequentially through the memory
1 If necessary, press Fax.
2 Press Address Book until Search & Dial appears on the bottom
line of the display and press OK.
3 Press the Scroll buttons until the number category you want
appears and press OK.
4 Press OK when All appears.
5 Press the Scroll buttons until the name and number you want
appears. You can search upwards or downwards through the entire
memory in alphabetical order.
Searching with a particular first letter
1 If necessary, press Fax.
2 Press Address Book until Search & Dial appears on the bottom
line of the display and press OK.
3 Press the Scroll buttons until the number category you want
appears and press
OK
.
4 Press the Scroll buttons until ID appears and press OK.
5 Enter the first few letters of the name you want and press OK.
6 Press the Scroll buttons until the name you want appears and
press OK.