Filter
Top Products
13.10 <
Maintenance>
Maintenance Parts
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your printer in top working condition the following items
will need to be replaced at the specified number of pages or when the
life span of each item has expired.
Samsung highly recommends that an authorized service provider,
dealer or the retailer where you bought printer performs this
maintenance activity.
Checking replaceables
If you experience frequent paper jams or printing problems, check the
number of pages the machine has printed or scanned. Replace the
corresponding parts, if necessary.
The following information are available for checking the replaceable
elements of your machine:
• Supplies Info: prints the supply information page.
• Total: displays the total number of pages printed.
• ADF Scan: displays the number of pages scanned using the ADF.
• Platen Scan: displays the number of pages scanned using the
scanner glass.
• Imaging Uint, Transfer Belt, Fuser, TransferRoller, Tray1 Roller,
Tray2 Roller: displays the number of pages printed each item.
To check the replaceables:
1 Press Menu until System Setup appears on the bottom line of the
display and press OK.
2 Press the Scroll buttons until Maintenance appears and press
OK.
3 Press the Scroll buttons until Supplies Life appears and press
OK.
4 Press the Scroll buttons until the item you want appears and press
OK.
5 If you selected to print a supply information page, press OK to
confirm.
6 Press Stop/Clear to return to Standby mode.
Items Yield (Average)
ADF rubber pad Approx. 20,000 pages
Transfer belt Approx. 60,000 images
Transfer roller Approx. 100,000 pages
Fuser unit
Approx. 100,000 black pages or
50,000 color pages
Tray rubber pad Approx. 250,000 pages
Pickup roller Approx. 50,000 pages
Replacing the ADF rubber pad
You will need to replace the ADF rubber pad when there seems to be a
consistent problem with paper pickup or when its specified yield is
reached.
1 Open the ADF cover.
2 Rotate the bushing on the right end of the ADF roller toward the
ADF and remove the roller from the slot.
3 Remove the ADF rubber pad from the ADF, as shown.
4 Insert a new ADF rubber pad into place.
1
bushing
2
ADF roller
1
2
1
ADF rubber pad
1