Filter
Top Products
Maintaining Your Printer
6.
4
Replacing Toner Cartridges
The printer uses four colors and has a different toner cartridge
for each one: yellow (Y), magenta (M), cyan (C), and black (K).
When the Toner LEDs, ( ) on the control panel, indicating each
individual toner cartridge according to its color, turn on, the
printer stops printing. Also, if you use the CLP-600N, the
display on the control panel shows the error message, “[Color]
Toner Empty”. At this stage, replace the toner cartridge in
question. When the
‘[Color] Toner Empty’ message appears,
printer will stop printing until a new toner cartridge put into the
printer.
To replace the toner cartridge:
1
Turn the printer off, then wait a few minutes for the printer
to cool.
2
Using the handle, completely open the access door.
CAUTION
:
• Do not touch the green surface, the OPC drum, on the front
of each toner cartridge with your hands or any other
material. Use the handle on each cartridge in order to avoid
touching this area.
• Be careful not to scratch the surface of the paper transfer
belt.
• If you leave the access door open for more than a few
minutes, the OPC drum can be exposed to light. This will
cause damage to the OPC drum. Close the access door
should the installation need to be halted for any reason.
3
Grasp the handles on the empty toner cartridge and pull to
remove the cartridge from the printer.
4
Take a new toner cartridge out of its package.
CAUTION
:
• Don’t use sharp objects, such as a knife or scissors, to open
the toner cartridge package. You could damage the surface
of the toner cartridge.
• To prevent damage, do not expose the toner cartridge to
light for more than a few minutes. Cover it with a piece of
paper to protect it if necessary.
5
Holding both handles on the toner cartridge, gently rock it
from side to side to evenly distribute the toner.