Filter
Top Products
Solving Problems
7.
9
In the Optional Tray2
If paper is jammed in the optional Tray2, a lamp turns on at the
corresponding location on the Status map. If you use the CLP-
600N, “Jam0 In Tray2” also appears on the display.
1
Using the handle, completely open the access door.
2
Open the top cover.
3
Push the levers up.
4
Open the inner cover using the handle on it and carefully
take the jammed paper out of the printer.
5
Close the inner cover and push the levers down. Go to step
14.
If you cannot find the jammed paper, or if there is any
resistance removing the paper, stop pulling and close the
access door. Go to step 6.
The fuser
is hot!