Filter
Top Products
2. 8
Printer Setup
Parallel Interface
1. Make sure that both the printer and computer are turned off.
2. Plug the cable into the connector on the back of the printer. Push the
metal clips down to fit inside the notches on the cable plug.
3. Connect the other end of the cable to the parallel interface port on
your computer. See your computer documentation if you need help.
USB Interface
1. Make sure that both the printer and computer are turned off.
2. Plug the USB interface cable into the connector on the back of the
printer.
3. Connect the other end of the cable to the USB port on your computer.
See your computer documentation if you need help.
Note: To print using USB interface, you must install the USB driver.
See page 2.13.