Samsung SCX-4720FN All in One Printer User Manual


 
P
APER
H
ANDLING
3.4
- Do not leave them in the paper tray for long periods of
time. Dust and dirt may accumulate on them, resulting
in spotty printing.
- To avoid smudging caused by fingerprints, handle them
carefully.
- To avoid fading, do not expose printed transparencies to
prolonged sunlight.
•For labels:
- Verify that their adhesive material can tolerate a fusing
temperature of 200
o
C (392
o
F) for 0.1 second.
- Make sure that there is no exposed adhesive material
between them. Exposed areas can cause labels to peel
off during printing, which can cause paper jams.
Exposed adhesive can also cause damage to machine
components.
- Do not load a sheet of them through the machine more
than once. The adhesive backing is designed for one
pass through the machine.
- Do not use labels that are separating from the backing
sheet or are wrinkled, bubbled or otherwise damaged.
Do not use Carbonless paper and Tracing paper. Use of
these types of paper could result in chemical smells and
could damage your machine.
Loading Paper
In the Standard Tray
Load the print material you use for the majority of your print
jobs in the standard tray.
The standard tray can hold a maximum of 250 sheets of 20 lb
plain paper.
You can purchase an optional paper tray (Tray 2) and attach it
below the standard tray to load an additional 250 sheets of
paper. See page C.5 for more information about installing the
optional Tray 2.