Sanyo VSP-9000 Network Card User Manual


 
English
45 System Setup
Communication Setup
(Continued)
B 2TELEMETRY
(Dome camera or zoom camera
communication setup)
Upon purchasing, the communication settings
are set to connect our video equipment to
cameras using coaxial cables.
Communication uses the video
communication terminal (VIDEO). For details,
see A-Connector.
b
bb
b Communication setup when using our
video equipment and cameras
A-Connector:
A-Protocol:
The communication protocol used on this
unit is SANYO SSP. Every time the
communication protocol is changed,
A-Baudrate is restored to the default
value.
A-Baudrate:
Select the data transmissions speed for the
camera connected to camera
communication terminal A.
Note: When Video is selected for
A-Connector, the Video data
transmission speed is fixed, and
A-Baudrate cannot be set.
b
bb
b Communication setup when using
competitor cameras
B-Connector: Telemetry
Operating a camera by connecting this unit
to camera using modular cable.
B-Protocol:
This is the communication protocol used on
this unit.
Every time the communication protocol is
changed, B-Baudrate is restored to the
default value.
B-Baudrate:
Select the data transmissions speed for the
camera connected to camera
communication terminal B.
Video: Connecting cameras via video
equipment.
Telemetry: Operating a camera by
connecting this unit to camera
using modular cable.
ent
esc
2-TELEMETRY
2-TELEMETRY
>A-Connector Video
A-Protocol SANYO SSP
A-Baudrate -----
B-Connector Telemetry
B-Protocol ----------
B-Baudrate -----
COMMUNICATIONS
COMMUNICATIONS