Filter
Top Products
English
49 System Setup
Control Setup
(Continued)
C 3–FUNCTIONS
Other functions can be started or stopped.
• Mtx/Dvr/Mux setup
Enables display of the video equipment
menu.
• Telemetry setup
Enables display of the camera menu.
• Autopan/Scan/Patrol
Enables automatic operation of dome
cameras.
• Joystick
Enables joystick operation.
• Camera Up/Dw
Moves camera input channel up and down.
(Function only available when matrix
multiplexer is connected.)
• Address change
Enables changing the camera address for a
hard disk digital recorder channel. When
ON, a camera icon is displayed in the upper
left of the camera address screen.
• Mon/Dvr/Mux change
Enables changing DVR-MUX address.
• Zoom/Focus/Iris
Enables changing zoom, focus, and iris
values for connected cameras.
• Aux
Enables Aux operation of connected
cameras.
• Wiper/Washer
Enables wipers and washers, special
functions of connected cameras.
• MAPS environment
Displays a user-created map when power is
turned ON.
• Spot Skip
When the “MON2” video output for the hard
disk digital recorder is set to camera
sequence mode, images from the camera
being operated are not output from the
“MON2” video output terminal.
ent
esc
3-FUNCTIONS
3-FUNCTIONS
>1 -Mtx/Dvr/Mux setup..
2 -Telemetry setup....
3 -Autopan/Scan/Patrol
4 -Joystick...........
5 -Camera Up/Dw.......
6 -Address change.....
7 -Mon/Dvr/Mux change.
8 -Zoom/Focus/Iris....
9 -Aux................
10-Wiper/Washer.......
11-MAPS environment...
12-Spot Skip..........
ACCEPTED VALUES
ACCEPTED VALUES
1
?