Sanyo VSP-9000 Network Card User Manual


 
English
System Setup 50
Password Setup (PASSWORD)
Passwords can be set for operations upon unit power ON, setup menu access, etc.
enter
.
0
Digit
password
Start
enter
.
0
Digit
password
Alarm reset
enter
.
0
Digit
password
Parameters
enter
.
0
Digit
password
Level 1
enter
.
0
Digit
password
Level 2
enter
.
0
Digit
password
Level 3
ent
>1-AT SWITCHING ON
2-ALARMS RESET
3-PARAM. MODIFICATION
4-GRAPH ENVIR. LEVEL 1
5-GRAPH ENVIR. LEVEL 2
6-GRAPH ENVIR. LEVEL 3
PASSWORD
PASSWORD
1-AT SWITCHING ON
2-ALARMS RESET
3-PARAM.MODIFICATION
4-GRAPH ENVIR. LEVEL 1
5-GRAPH ENVIR. LEVEL 2
6-GRAPH ENVIR. LEVEL 3
Password required upon alarm reset
Password required upon power ON
Password required upon accessing setup
menu
Password required to enter Graphics
Environment Setup Level 1
Password required to enter Graphics
Environment Setup Level 2
Password required to enter Graphics
Environment Setup Level 3
Write down each password to
remember them. Also, periodic
password changes are recommended
for safety.
When purchased, the password is set
to 00000. When no password is
required, set it as 00000.
When the unit is initialized, all
passwords become 00000.
When a password is set, an entry
screen will appear, requesting your
password (example: upon power ON).
Enter the password that is set.
When the wrong password is entered,
Password not enabled is displayed.
Enter the correct password.