Sanyo VSP-9000 Network Card User Manual


 
English
53 System Setup
Setup (CONFIGURATION)
(Continued)
b
bb
b Initialize
(RESTORE BASIS VALUES)
When this is set, the settings of each menu
screen revert to the default settings.
1
Press the button or
button to select RESTORE
BASIS VALUES, then press
the button.
The 1RESTORE BASIS VALUES
screen is displayed.
2
Press the button.
After >>...Restore << is displayed,
>>Restore performed<< flashes and the
unit is initialized. After initialization is
complete, perform menu setup again.
b
bb
b Buzzer and menu display setup
(BUZZER/DISPLAY)
1
Press the button or
button to select BUZZER/
DISPLAY, then press the
button.
The 2BUZZER/DISPLAY screen is
displayed.
2
Press the button or
button to select a setup item,
then press the button.
The selected setting value will flash.
Press the button or button to
switch the selected item.
Setup items:
1Key pressed: Button operation
This setting sounds a buzzer when a
button on the screen is pressed.
Selections: MAX (loud), MIN (soft)
2Joystick: Joystick Operation
This setting sounds a buzzer when the
joystick is moved.
Selections: YES, NO
3Serial error: Serial error detection
This setting sounds a buzzer upon a
serial communication error.
Selections: YES, NO
ent
ent
esc
1-RESTORE BASIS VALUES
1-RESTORE BASIS VALUES
>Confirm? (ENTER)
CONFIGURATION
CONFIGURATION
ent
esc
1-RESTORE BASIS VALUES
1-RESTORE BASIS VALUES
>Confirm? (ENTER)
>>... Restore <<
CONFIGURATION
CONFIGURATION
esc
1-RESTORE BASIS VALUES
1-RESTORE BASIS VALUES
>Confirm? (ENTER)
>>Restore performed<<
CONFIGURATION
CONFIGURATION
ent
ent
esc
2-BUZZER/DISPLAY
2-BUZZER/DISPLAY
>1-Key pressed : MAX
2-Joystick : YES
3-Serial error : YES
4-Matrix alarm : YES
5-Power saving : NO
CONFIGURATION
CONFIGURATION
ent