Filter
Top Products
Advanced Mode Counters
The Advanced Counters Mode is provided for reading and clearing the internal
counters. These counters allow the user to keep track of the number of centimeters of
label material that has passed through the printer, how many labels have been
dispensed or how many labels have been cut. The Advanced Mode Setup is entered
by pressing the LINE key once.
From this display, pressing the FEED key once will bring up the COUNTERS display
The Counters display is used to select the internal printer counter to be accessed. The
counters are identified in the display as:
HEAD: Head Counter
DSP: Dispense Counter
CUT: Cutter Counter
LIFE: Life Counter
1. Use the LINE key to step the underline cursor to either the counter to be accessed,
the Head counter, Dispenser (DSP) counter or the CUT (Cutter) counter. Use the
FEED key to display the values stored for that particular counter.
2. Pressing the FEED key again will bring up the Counter Clear display. To clear the
counter, press the LINE key until the underline cursor is beneath the YES. If you
do not want to clear the counter, press the LINE key until the underline cursor is
beneath the NO display. Pressing the FEED key will clear the selected counter (if
YES was chosen and bring you to the Exit Advanced Mode Setup display.
Exit Advanced Mode
This allows you to exit the Advanced Mode or to recycle through the selections again.
ADVANCED MODE
COUNTERS
COUNTERS
HD DSP CUT LIFE
HEAD COUNTER
0.0
HEAD CNTR CLEAR
NO YES
EXIT ADV. MODE
NO YES
Section 2. Installation and Configuration
Page 2-369001035 Rev. ESATOCL SeriesPrinters