Filter
Top Products
Journal Print
Command Structure <ESC>J
Example: See above
Placement: Immediately following <ESC>A
Default: None
Command Function To print text in a line by line format on a label. By specifying this
command, you automatically select Font S with a Character
Expansion of 2x2. You also establish a base reference point of H2,V2.
The character pitch is 2 dots and the line gap is 16 dots. Simply issue
an ASCII <CR> at the end of each text line.
Input to Printer
Printer Output
Special Notes 1. Journal mode assumes a maximum label width. Otherwise, you
may print where there is no label and damage your print head.
2. It is effective only for the current print job.
Page 44 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide