Filter
Top Products
Backfeed Enable
Command Structure <ESC>CEa
a = 0 Disable Backfeed
1 Enable Backfeed
Example: <ESC>CE1
Placement: This command should be sent in a separate data
stream.
Default: Last setting
Command Function To select the top-of-label sensing method.
Input to Printer
Printer Output Theres is no printer output as a result of this command.
Special Notes 1. When Backfeed is enabled, the printer will feed the last label of a
print job forward to the dispense/cut position. Upon the receipt of
the next print job, it will retract the label to the first print line
position before printing.
Page 89 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide