Filter
Top Products
Page 24 PN9001122
4
Before Starting
(3) Place the label roll on the spindle on
the open cover side.
* When inserting the label roll, make
sure to press down the label core to
prevent the labels from raveling out.
* When removing remaining labels,
insert your finger in the label core and
remove the label with the core to
prevent the labels from raveling out.
(4) After removing the leading tape on
the roll, take the leading edge of
the first label of the roll and pull it
out from the label ejection via the
platen roller. Then, adjust the label
guide (left) to the label size, and
pass the label underneath the label
guides.
(5) Place your fingers on the open
cover ribbed area and close the
open cover.
This completes the loading of labels when using the Continuous
mode.
Label guide
(Left)
Label set position