Filter
Top Products
PN9001122 Page 37
6
Starting the Printer
Test Printing Mode
(1) Press the power switch to ON
while pressing the Feed key to
turn to the Test mode. To start
test printing, press the Feed key
again.
(2) Check the following after the test
printing:
* Is the thermal head off or in
place ?
* Is the printing in good condition ?
During test printing, the full
battery is indicated as
.
When the indicator shows
,
recharge the battery.
* Contact your nearest dealer or Customer Service Center for
any problems. For repairs , see “Ordering Repairs” and
follow the instructions.
Feed key