Filter
Top Products
PN9001122 Page 25
4
Before Starting
First perform steps 1 through 5 on pages 23 and 24
(Continuous mode)
(1) Pick the Dispense/Continuous
switch lever from both sides, and
slide the Dispense unit to the
direction of the arrow.
* Leave more than 30mm of the
label out for the Dispense mode.
* Slide the Dispenser unit until it is
set in place.
* Always set the Dispenser unit back
to the Continuous mode when
opening/closing the cover.
Dispense mode
Labels
Non-dispensed
label
At the Continuous mode
STD
At the Dispense mode
DSP
Over 30mm