![](http://pdfasset.owneriq.net/5/3f/53fa62cb-03ce-4116-a653-1474a34c95a3/53fa62cb-03ce-4116-a653-1474a34c95a3-bg20.png)
PN9001122 Page 32
6
Starting the Printer
4. Set the interface cable.
5. Tighten screw A.
6. Fit the protector cover as indicated.
* When the cable is thin, place the jut the other way around.
7. Tighten screw B.
* Be sure to secure the interface cable from touching the
battery cover when opening it.
Setting up the DIP switch
* The DIP switch is visible when opening the cover.
Battery
cover
Interface
cable