Filter
Top Products
GENERAL PRINTER SPECIFICATIONS
Page 1-2 PN 9001074 Rev. B SATO CL Series “e” Printers
Section 1. Printer Overview
SPECIFICATION CL408e CL412e CL608e CL612e
PRINT
Method Direct or Thermal Transfer
Speed (User Selectable) 2 to 6 ips
50 to 150 mm/s
4to8ips
100 to 200 mm/s
Print Module (Dot Size) .0049 in.
.125 mm
.0033 in.
.083 mm
.0049 in.
.125 mm
.0033 in.
.083 mm
Resolution 203 dpi
8 dpmm
305 dpi
12 dpmm
203 dpi
8 dpmm
305 dpi
12 dpmm
Maximum Print Width 4.1 in.
104 mm
6.0 in.
152 mm
6.5 in.
164mm
Maximum Print Length 49.2 in.
1249 mm
32.8 in.
833 mm
49.2 in.
1249 mm
32.8 in.
833 mm
MEDIA
Minimum Width .87 in. (22 mm) 1.96 in. (50 mm)
Minimum Length .24 in. (6 mm) .78 in. (20 mm)
Maximum Width 5.1 in. (131 mm) 7 in. (178 mm)
Type Die Cut Labels, Fan-Fold, Tag Stock or Continuous
Caliper .010 in. (.25 mm)
Roll OD (max) 8.6 in. (218 mm), Face-In Wind
Core ID (min) 1.5 in. (38 mm)
Core ID (Recommended) 3 in. (76 mm)
SENSING
Transmissive See-thru Movable
Reflective Eye-Mark Movable Fixed
Continuous Form Sensor not used
RIBBON
Maximum Width 4.4 in. (111 mm) 6.75 in. (172 mm)
Length 1475 ft. (450 m) 1345 ft (410 m)
Thickness 4.5 micron, Face-In Wind
All specifications subject to change without notice.