SATO 612e Printer User Manual


 
SATO CL Series “e” Printers PN 9001074 Rev. B Page 1-3
Section 1. Printer Overview
SPECIFICATION CL408e CL412e CL608e CL612e
CONTROLS AND SIGNALS
On-Line LED Status = Green
(1)
Green
Power LED None Green
Media Out LED Status = Red
(1)
Red
Ribbon Out LED Status = Red
(1)
Red
Error LED Status = Red
(1)
Red
LCD Panel 2 Line x 16 Character
On/Off-Line Switch Front Panel
Label Feed Switch Front Panel
Power On/Off Switch Rear Panel
POTENTIOMETER ADJUSTMENTS
Print Darkness Front Panel
Pitch Front Panel
Offset Front Panel
Display None Front Panel
INTERFACE MODULES
Parallel IEEE1284 Parallel
Serial RS232C (9600 to 57,600 bps)
RS422/485 (9600 to 57,600 bps)
Serial Protocol Hardware Flow Control (Ready/Busy)
Software Flow Control (X-On/X-Off)
Bi-directional Status
Universal Serial Bus USB Version 1.1
Ethernet 10/100BaseT
Data Transmission ASCII Format
PROCESSING
CPU 32 Bit RISC
Flash ROM 2 MB
SDRAM 16 MB
Receive Buffer 2.95 MB
Optional Flash ROM 4 MB
Optional PCMCIA Memory 16 MB Flash or 4 MB SRAM
(1) Single two color (Red, Green) LED.
All specifications subject to change without notice.