Filter
Top Products
Unit 1: Introduction
SATO XL400-410e Operator Manual PN 9001135A Page 1-4
CONTROL FEATURES
Figure 1-2a, Control Features
BUTTONS & SWITCHES
POWER Two position on/off switch that controls power flow to the system.
START / STOP Toggles the printer on/off line.
FEED Allows feeding of one tag or label each time it is pressed. Is only
functional when the printer is off-line. Feeds one label when the
cutter is disabled. Feeds one label, cuts, and backfeeds when the
cutter is enabled.
CUTTER ON/OFF Enables or disables the cutter. Is only functional when the printer is
off-line.
EJECT Feeds out any printed media. If the cutter is enabled; it feeds, cuts,
and backfeeds. If cutter is disabled; it ejects, cuts, and backfeeds.
MEDIA TYPE Allows the selection of the applicable media to be printed.
DSW1 & DSW2 Used to configure RS232 interface. Located behind access panel
inside the printer.
DSW3 Is largely reserved. Located behind access panel inside the printer.
VR4
VR3
VR2
VR1
DSW 1
DSW 2
DSW 3
DARKNESS
CUT
POSITION
PRINT
POSITION
DISPLAY
Potentiometers Dip Switches
Reference Label