Filter
Top Products
Unit 4: Operation
SATO XL400-410e Operator Manual PN 9001135A Page 4-4
DSW2 DEFAULT SETTINGS
2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8
OFFOFFOFFOFFOFFOFFOFFOFF
DSW2 CONFIGURATION
DSW2 FUNCTION SETTING CONFIGURATION
2-1 Print Mode
OFF Thermal Transfer
ON Direct Thermal
2-2 Reserved
OFF N/A
ON N/A
2-3 Head Check
OFF Head Check Disabled
ON Head Check Enabled
2-4 Hex Dump
OFF Hex Dump Disabled.
ON Hex Dump Enabled
2-5 Receive Buffer
OFF Single Job Receive Buffer
ON Multi-Job Receive Buffer
2-6 Firmware Download
OFF Disabled
ON Enabled
2-7 Protocol Code
OFF Standard Protocol Mode
ON Non-Standard Protocol Mode
2-8 Operational Mode
OFF Standard Mode
ON Compatibility Mode
DSW2 FUNCTION DESCRIPTIONS
FUNCTION DESCRIPTION
Print Mode Print with the use of ribbon or without.
Head Check When enabled, will check for malfunctioning head elements.
Hex Dump Allows hexadecimal printing of all data received to the print buffer.
Receive Buffer
Allows to continuously receive print jobs while compiling and printing
other jobs.
Firmware Download Places printer in mode for downloading software into flash ROM.
Protocol Code Selects the command codes used for protocol control.
Operational Mode Standard mode or for original XL400/410.