Filter
Top Products
Unit 4: Operation
SATO XL400-410e Operator Manual PN 9001135A Page 4-6
CONFIGURATION MODES
With exception of the Power switch located on the back side of the printer, all of the following
configuration activities are performed via the use of the operator panel located on the printer’s right
side and the adjustment panel located within the printer’s interior.
Many settings may also be controlled via software commands. In the case of conflict between the
software and control panel settings, the printer will always use the last entered valid setting.
NORMAL MODE
When a print job is received, the LCD will count off the label quantity as they are printed.
Figure 4-1, Normal Mode
ONLINE
000000 00000000
POWER
Printer
beeps
START/STOP
Display of media default
or selection.
PRINT DARKNESS
1 2 3
START/STOP to scroll.
FEED to select.
3
seconds
transpires
PRINT SPEED
X X X X
START/STOP to scroll.
FEED to select.
PRINT OFFSET
V: +000 H: +000
START/STOP to scroll.
FEED to select.
Display of media
selected.
MEDIA TYPE
To change
selection.
START/STOP + FEED
PRINT OFFSET
V: +000 H: +000
START/STOP to scroll.
FEED to select.
ZERO SLASH
YES NO
START/STOP to scroll.
FEED to select.
CANCEL PRINT JOB
YES NO
Yes / No
START/STOP to scroll.
FEED to select.
CANCEL PRINT JOB
COMPLETED
START/STOP to scroll.
FEED to select.
START/STOP