Filter
Top Products
Unit 4: Operation
SATO XL400-410e Operator Manual PN 9001135A Page 4-24
CARD MODE
MENU DESCRIPTION
CARD MODE Menu allows configuration of the memory card.
MEM SELECT(CC1)
CARD MEMORY
Establishes the media of the first drive. The default value is on
the card. START/STOP key moves the cursor and the FEED
key selects the option.
CARD->MEMORYCOPY
ALL Y/N
Allows the copying of the entire card contents into Flash ROM.
START/STOP key moves the cursor and the FEED key selects
the option.
MEMORY->CARDCOPY
ALL <?MB> Y/N
Allows the copying of the entire contents of the Flash ROM or
firmware. A 4MB card or greater is required. An error occurs if
an insufficient memory card is used.
CARD->MEMORYCOPY
PROGRAM Y/N
Allows corying of Firmware program. Can overwrite the
Firmware program card in program ROM. A program card is
created by copying to the memory card of the Firmware
mentioned later.
MEMORY->CARDCOPY
PROGRAM Y/N
Allows copying of the Firmware program in the memory card. A
2MB card or greater is required. START/STOP key moves the
cursor and the FEED key selects the option.
CARD FORMAT
YES NO
Allows formatting of the memory card and to clear all internal
contents. START/STOP key moves the cursor and the FEED
key selects the option.
MEMORY FORMAT Allows formatting of Flash ROM memory. START/STOP key
moves the cursor and the FEED key selects the option.
xxxxxxx START
YES NO
Initiates the copying or formatting activity. START/STOP key
moves the cursor and the FEED key selects the option.
COPYING Displays that the copying or formatting activity is underway.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
COMPLETED
Displays that the copying or formatting activity is complete.
After 3 seconds of display, returns to the original screen.
CARD COPY/FORMAT
ERROR
Displays if the copying or formatting activity incuured an error
and could not complete. The FEED key returns the display to
the original screen.
CARD ID ERROR
PRESS FEED KEY
Displays when the incorrect card has been selected. The FEED
key returns the display to the original screen.
USER TEST PRINT MODE
MENU DESCRIPTION
TEST PRINT MODE
CONFIGURATION
Allows the selection of the desired test print type. Press START/
STOP to scroll the options and FEED to select.
PRINT SIZE
03CM
Sets the width of test print media. START/STOP key moves the
cursor and the FEED key selects the option.
USER TEST PRINT
PRESS FEED KEY
Initiates test printing. Press the FEED key to initiate test printing
and FEED again to interrupt.