Filter
Top Products
Unit 4: Operation
SATO XL400-410e Operator Manual PN 9001135A Page 4-14
CARD MODE
This configuration mode is used for configuring the Flash ROM and/or PCMCIA interface cards.
The following table identifies the menus of the Card Mode and their purpose. The flow chart after,
sequences the operator, printer, and host interface activities.
Figure 4-8, Card Mode
ADVANCED MODE
START/STOP + POWER
START/STOP
Printer
beeps.
CARD MODE
FEED
MEM SELECT(CC1)
CARD MEMORY
CARD->MEMORYCOPY
ALL Y/N
MEMORY->CARDCOPY
ALL <0MB> Y/N
CARD->MEMORYCOPY
PROGRAM Y/N
MEMORY->CARDCOPY
PROGRAM Y/N
CARD FORMAT
YES NO
MEMORY FORMAT
YES NO
START/STOP to scroll.
FEED to select.
START/STOP to scroll.
FEED to select.
START/STOP to scroll.
FEED to select.
START/STOP
COPY START
YES NO
Copy
begins
Yes / No
START/STOP to scroll.
FEED to select.
Yes / No
COPY START
YES NO
Yes / No
Copy
begins
START/STOP to scroll.
FEED to select.
Yes / No
Yes / No
START/STOP to scroll.
FEED to select.
START/STOP to scroll.
FEED to select.
Yes / No
Format
begins
START/STOP to scroll.
FEED to select.
Yes / No
START/STOP to scroll.
FEED to select.
Yes / No
FORMAT START
YES NO
START/STOP to scroll.
FEED to select.
Yes / No