Filter
Top Products
Replacing Consumables and Maintenance Kit
20
1
M
Close the upper left cover (A
AA
A) and
push the handle (B
BB
B) slowly to the
back until it clicks into place.
N
If you removed the External Tray
in step
D
, reattach it to the printer.
Insert the hooks of the External
Tray into the printer slits, and
lower it toward you.
O
If the Duplex Unit is installed,
close the Duplex Reversal Unit.
Reference
See P.2 “Opening and Closing the
Duplex Reversal Unit”
P
If the 2 Tray Finisher was in-
stalled, reattach the 2 Tray Finish-
er to the printer.
Reference
See P.1 “Detaching the SR770 (2
Tray Finisher)”
Q
Plug in the power cable and turn
on the power switch.
The following message appears on
the panel display. Please wait for a
while.
Please Wait
The following message appears on
the panel display, and the printer
starts color registration adjustment
automatically. Please wait for a
while.
Calibrating...
After finishing adjustment, the fol-
lowing message appears.
Initializing...
Please Wait
R
Confirm that the following mes-
sage is displayed on the panel dis-
play, and then press {
{{
{Enter}
}}
}.
Press # for
Fuser Adjust
ZDJH051J
ZDJH010J