Filter
Top Products
Appendix
54
3
❖
❖❖
❖ Envelopes
• When printing on envelopes, use the Bypass Tray.
• Specifications of envelopes are as follows:
• You can load up to 10 envelopes (72 - 92 g/m
2
, 19 - 24 lb) in the Bypass Tray at the
same time, without forcibly pressing them. Confirm that the envelopes are not damp,
and that the top of the stack is n\ot higher than the limit mark on the side guide.
• Confirm that the print side is facing up when loading onto the Bypass Tray.
• Load the envelopes with the flaps aligned to the left side fence. The flaps
should be securely folded up.
• Confirm that there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left,
top, and bottom print margin, to at least 15 mm (0.6") each.
• Do not print on both sides of envelopes.
• Load only one size and type of envelopes at the same time.
• Before loading envelopes, flatten the leading edges (the side being fed into
the printer) of them by running a pencil or ruler across them.
• Before loading envelopes, confirm that they are rectangular in shape.
• Supported size of envelope is listed on "Paper and Other Media" in Mainte-
nance Guide 2.
❖
❖❖
❖ Paper not supported by this printer
Avoid using the following types of paper that are not supported by this printer:
• Paper meant for an ink-jet printer
• Bent, folded, or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Paper that is dry enough to emit static electricity
• Paper that has already been printed onto, except a preprinted letterhead
• Coated paper
• Special paper, such as thermal paper, aluminum foil, carbon paper and
conductive paper
• Paper whose weight is heavier or lighter than the limitation.
• With windows, holes, perforations, cutouts, or embossing
• Label paper on which glue or base paper is exposed
• Paper with clips or staples
Metric version Inch version
Weight 72 - 90 g/m
2
19 - 24 lb
Recommended weight
and size
72 g/m
2
, 114 × 162 mm
(C6 Env)
24 lb, 3
7
/
8
" × 7
1
/
2
"
(Monarch)