Filter
Top Products
Clearing and Adjusting the Printer
38
2
Note
❒ The current resolution is dis-
played on the printer driver
properties.
❒ To adjust the color registration
on thick paper, select "Thick:
600dpi" regardless of the cur-
rent resolution.
H
Confirm that the following mes-
sage is displayed, and then press
{
{{
{Enter}
}}
}.
Press # for Test
Print (Bypass)
The following message appears on
the panel display. The size of the
paper loaded in step
A
is shown.
Set Sheet, then#
A3 (297 X 420)
I
Confirm that A4L
LL
L or larger paper
is in the Bypass Tray, and then
press {
{{
{Enter}
}}
}.
The Test Sheet is printed. See P.40
“Test Sheet Samples”
J
Press {
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} to make the off-
set settings, and then press {
{{
{En-
ter}
}}
}.
When such a clear (not smeared in
red) square as the sample is:
• at its center position, select "0".
• shifted to the left, select "-1".
• shifted to the right, select "+1".
Select Action:
0: Exit
Select Action:
-1: Re-adjust
Select Action:
+1: Re-adjust
If you select "0: Exit", the printer re-
turns to the previous menu.
If you select "-1" or "+1", the printer
returns to step
H
. Keep adjusting
until "0" is available.
K
Press {
{{
{On Line}
}}
}.
"Ready " appears on the panel dis-
play.
Ready
Manual Adjust
Important
❒ Normally, do not perform manual
color adjustment.
A
Press {
{{
{Menu}
}}
}.
"Menu" appears on the panel dis-
play.
B
Press {
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} to display "Main-
tenance", and then press {
{{
{
Enter
}
}}
}.
Menu:
Maintenance
The maintenance menu is dis-
played.
C
Press {
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} to display "Col-
or Regist.", and then press {
{{
{Enter}
}}
}.
Maintenance:
Color Regist.
On Line
Menu
Job Reset
Escape
#
Enter
Form Feed
Power Error Data In
ZDJS001N