Filter
Top Products
Replacing the Fusing Unit
21
1
S
Confirm that the following mes-
sage is displayed on the panel dis-
play, and then load the A3 paper
which comes with the Fusing
Unit in the Bypass Tray.
Set Sheet in
Bypass, then #
A Open the Bypass Tray.
B Pull out the Bypass Tray Exten-
sion, and then flip it open.
C Slide the side guides outward
(A
AA
A), and then load paper until
it stops with the print side up
(B
BB
B).
D Adjust the side guides to the
paper width.
Important
❒ Be sure to shuffle the paper
before loading the stack onto
the tray so multiple sheets
are not fed in at one time.
T
Confirm that the A3 paper which
comes with the Fusing Unit is in
the Bypass Tray, and then press
{
{{
{Enter}
}}
}.
The printer prints 8 Test Sheet (A -
H). For details about Test Sheet,
see P.40 “Test Sheet Samples”.
Note
❒ It takes about a minute to start
printing.
ZDJH202J
ZDJH203J
ZDJH204J
ZDJH205J